What Does Foundation Underpinning Mean?

A foundation underpinning repair is a procedure to strengthen and stabilise foundations in need of repairs. The foundation underpinning procedure is used to repair differential settlement. When a foundation sinks into the earth unevenly, this is called differential settlement. A foundation that is experiencing differential settlement can be severely damaged by structural problems. A foundation underpinning masonry resurfacing is a method of raising the area beneath that section.

What is the cause of differential settlement?

Differential settlement can be caused by a variety of things.

It is important to know that expansive soil has a large percentage of clay. Because of this, the soil expands when it absorbs moisture and contracts as it dries. This causes soil movement under the house.

The soil is susceptible to erosion. This can cause the foundation to sink into the voids. Differential settlement will occur if your foundation sinks through the voids.

Tree roots that “drink moisture” from soil can leave voids.

Not adequately compacted soil – The soil needs to be packed down before it is built upon. If the foundation is not built correctly, it will sink into the earth after the building has been completed, resulting in differential settlement.

It is called ‘downhill creep’ when soil that was at the summit of the hill gradually moves down the slope. A foundation may be damaged by this, resulting in differential settlement or structural damage.

Earthquakes can lead to differential settlement.

It is important to avoid excavation near your foundation. If you neighbor begins digging next to your property, the hole could lead to foundation instability and differential settlement.

Incorrect Drainage: It is essential that rain water be directed away from foundations by downspouts. Installing proper drainage systems around your home can help prevent foundation issues.

Why Does a Foundation Need Underpinnings

Underpinnings are primarily used to compensate for differential settlement. It’s not just differential settlement that can cause a foundation needing to be underpinned. If you are planning on adding an additional story to your building or home, for example, it is important to have the foundation reinforced.

You can ensure the stability of your home’s foundation for many more years by lifting, leveling and stabilizing it with piers installed around the foundation.

How Does Underpinning Work?

Both push piers (also known as helical piers) and helical anchors are commonly used for foundations. The type of foundation chosen will depend on many factors, such as weight, soil condition, etc. They are installed into soil that can support the building and driven in using its weight. Helical Piers are monitored and recorded while they are screwed in the ground underneath the house. Install brackets to foundation. The helical-pier will then be installed after all piers reach the depths specified and have the capacity. Loads are then transported to the newly installed pier systems. Lifting can also take place at this point if needed. Helical piles can also help with new constructions, home additions, or porches. The helical piers ensure the foundation is poured over stronger soil and not on weak clay.

Push Piers installation is generally done as follows:

First, you will need to remove the soil from the surrounding area of the foundation.

In the area to be underpinned, attach heavy-duty steel brackets every few feet. These brackets serve to support the pilings.

The hydraulic pressure is used to drive the push piers into the ground until the structures weight reaches the soil that can support the structure.

As soon as the piers in the foundation are set up, they will be connected to steel brackets. Next, a hydraulic lifting system that is synchronized raises it to its highest practical level. In other words, the building’s maximum level is reached without damage.

It is now time to repair the damage.